1. Home
  2. WAVE Radio
  3. Cloning Devices – Post Device Registration

Cloning Devices – Post Device Registration

The Post Registration Cloning allows you to copy the contacts, talkgroups, or configuration (device parameters) after the device registration. You can copy the configuration details of the source device without selecting the contacts and talkgroups or can copy only the contacts and talkgroups to the cloning device without selecting the source device. Source device in the following is the device from which you want to copy the details. The following procedure is applicable for TLK 100, TLK 150, EVOLVE, and SLN1000 devices.

To copy the details from a source device post-registration, follow these steps:

  1. From the Customer menu, click Clone Devices.
  2. From the Clone Device from the drop-down, select the source device from which you want to copy the details.
  3. From the Devices, select the checkboxes next to the devices to which you want to copy the details.
  4. If you want to copy the device parameters from the source device then select the Configuration check box.
  5. From the Contacts drop-down, do one of the following:
    1. If you do not want to copy the contacts to the clone device, then select Do not clone.
    2. If you want to manually copy the contacts of the registered devices to the clone devices then select Manually selected.
    3. If you want to copy only the contacts of the source devices, then select Clone from source. The Clone from Source shows only when you select the Source device from the Clone Device from.
  6. If you want to link all the selected WAVE devices with each other then select the Associate all selected WAVE devices with each other check box.
  7. From the Talkgroups drop-down, do one of the following:
    1. If you do not want to copy the talkgroups to the clone device, then select Do not clone.
    2. If you want to manually copy the talkgroups of the registered devices to the clone devices then select Manually selected.
    3. If you want to copy only the talkgroups of the source device, then select Clone from source. The Clone from Source shows only when you select the Source device from the Clone Device from.
  8. Click OK to the confirmation message that displays.
  9. A cloning success message display. Click View My Devices to go to the Devices page.

Refer to the “Manage Talkgroups” in the Adding a TLK 100 Device and Adding a TLK Device to view and manage the talkgroups for the WAVE devices.

If you do not have enough WAVE wireless licenses to activate all your devices you will be prompted to purchase them. You can also purchase WAVE wireless licenses directly from your Account page.


Updated on April 29, 2021

Was this article helpful?

Related Articles

Leave a Comment

Language